德州三嘉机器制造有限公司
这是描述信息
这是描述信息
这是描述信息
这是描述信息

Recruiting sales agents

这是描述信息
语言选择

News

新闻资讯

当前位置:
Homepage
>
>
Two TLS2216x6M type deep hole boring and boring machines have been sent to customers.

Two TLS2216x6M type deep hole boring and boring machines have been sent to customers.

  • Categories:News Center
  • Author:
  • Origin:
  • Time of issue:2021-05-06
  • Views:0

(Summary description)

Two TLS2216x6M type deep hole boring and boring machines have been sent to customers.

(Summary description)

  • Categories:News Center
  • Author:
  • Origin:
  • Time of issue:2021-05-06
  • Views:0
Information

On May 3 and 4, two tls2216x6m deep hole broaching and boring machines designed and manufactured by our company completed the test run, and were successfully loaded and sent to Qingdao customers.

Before delivery, all departments made comprehensive preparations for the delivery of the deep hole broaching and boring machine to ensure that all accessories of the machine are complete without omission, and the quality inspection department did a good job in the final inspection before delivery. And communicate with the person in charge of the customer to ensure the normal unloading.

Product introduction:

This machine is a special CNC deep hole broaching machine designed and manufactured for the inner hole boring of centrifugal casting superalloy pipe.

The machine tool is equipped with a through spindle, the workpiece passes through the spindle hole, and the chuck at both ends of the spindle holds the workpiece and drives the workpiece to rotate.

When boring, the broaching process is adopted. The workpiece rotates and the cutter feeds but does not rotate.

The oil feeder is used to supply cutting fluid to the workpiece and discharge cutting fluid and chips to the head end of the bed.

The machine tool is designed and manufactured in two forms of left-hand operation and right-hand operation. The left-hand and right-hand machine tools are installed relative to each other during installation. The operation position is between the two machine tools. The operator can operate the two machine tools, and the two machine tools share an automatic chip removal machine.

Main parameters of machine tool:

Boring diameter range ——————————————————————————Φ 50~ Φ 150mm

Length range of machined workpiece ————————————————————2000~6000mm

Chuck clamping diameter range ——————————————————————Φ 60~ Φ 160mm

Diameter of chuck through hole—————————————————————— Φ 160mm

Maximum bearing capacity of machine tool————————————————— 5t

Headstock spindle center height ——————————————————————350mm

Spindle diameter of headstock ———————————————————————Φ 180mm

Headstock spindle speed range ——————————————————————100 ~ 500r / min (two gear hydraulic shift, stepless speed regulation of servo spindle)

Feed speed range———————————————————————————— 50~350mm/min

Fast moving speed of Trailer———————————————————————— 6m/min

Main motor power of servo spindle————————————————————— 30KW

Feed AC servo motor ———————————————————————————4.4KW

Total power of machine motor (about) ———————————————————50KW

Rail width———————————————————————————————— 650mm

Cooling system head ———————————————————————————40 meters

Cooling system flow ———————————————————————————10M ³/ H (two sets)

Machine tool dimensions (about)————————————————————— 18m × 4m × 2m

Total weight of machine tool (about)———————————————————— 20t

Scan the QR code to read on your phone

相关资讯

Contact details

Telephone:+86 0534 - 7577666 
Mobile phone:+86 15153447777  
Fax:+86 0534-7578666

Customer service:+86 15215348180

Mailbox:shg@sjmachine.cn

Address:North Section of Lepu Avenue, Dezhou Economic Development Zone (from the terminal of No. 2 bus, 2 kilometers east of the road)

Dezhou Sanjia Machine

Manufacturing Co., Ltd.

Dezhou Sanjia Machine Manufacturing Co., Ltd.

© 2020 Dezhou Sanjia Machine Manufacturing Co., Ltd.   All Rights Reserved   鲁ICP备08016914号   

这是描述信息